LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2023 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Interior Trim (Model 3) >> Headliner >> Headliner (without e-Call Button) (EMEA) - Retrofit >> Install

Headliner (without e-Call Button) (EMEA) - Retrofit: Install

  1. Install the headliner. See Headliner - Remove and Install 
  2. Connect a laptop with Toolbox 3 to the vehicle. See TOOLBOX 3 - CONNECT AND DISCONNECT
  3. Using Toolbox 3 to change the configuration value for eCallEnabled  to enabled_ui_sos  . See GATEWAY CONFIGURATION (DISPLAY AND CHANGE)
  4. On the touchscreen, touch Controls > Safety  and make sure that the SOS  shortcut button (1) and the SOS EMERGENCY CALL  button (2) are available on the touchscreen.
    NOTE: The SOS  shortcut button (1) takes the user directly to the Safety and Security tab, the SOS EMERGENCY CALL  button (2) makes the actual call when touched.
    G00650282Courtesy of TESLA, INC.
  5. Using toolbox 3:
    1. Select the Actions  tab, and then type "VFOHC" in the search field.
    2. Run the ODIN routine TEST-SELF_VCLEFT_X_VFOHC and allow the routine to complete.
    3. Disconnect the laptop from the vehicle.
  6. Reinstall the vehicle firmware. See SOFTWARE REINSTALL - TOUCHSCREEN
  7. Inform the customer why the e-Call functionality has changed after the headliner retrofit and instruct them how to use the touchscreen to make an emergency call.
scientia non olet · About LEMON Manuals