Camera - Occupant - Remove and Replace: Remove
- Remove the rear view mirror. See MIRROR - REAR VIEW (REMOVE AND REPLACE) .
- Release the clips that attach the upper quad camera cover, disconnect the occupant camera connector(s), and then remove the camera cover from the vehicle.
- Release the tabs (x3) that attach the occupant camera to the upper quad camera cover, release the electrical harness (if equipped) from the camera cover, and then remove the camera from the camera cover.NOTE: If one or more tabs are broken, the camera may be attached by screws (torque 1 N.m/8.85 in-lbs.).
Old Camera Type
New Camera Type
NOTE: Old Camera Type Removed From Camera CoverNOTE: New Camera Type Removed From Camera Cover