Amplifier - Antenna - FM - Remove and Replace: Remove
- Remove the LH side rail trim. See TRIM - SIDE RAIL - LH (REMOVE AND INSTALL) .
- Disconnect the electrical connector from the FM antenna amplifier.
- Remove the bolt and release the clip that attach the FM antenna amplifier to the C-pillar, and then remove the amplifier from the C-pillar.
4 N.m (2.9 ft-lbs)
NOTE: The FM antenna amplifier is still connected to the backlight harness. - Release the tabs that attach the FM antenna amplifier cover to the FM antenna amplifier, and then remove the cover.
- Disconnect the backlight electrical connector from the FM antenna amplifier.