ECU - Headlight - Remove and Replace: Remove
- Raise and support the vehicle. See RAISE VEHICLE - 2 POST LIFT .
- Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
- Remove the cabin intake duct. See DUCT - CABIN INTAKE (REMOVE AND REPLACE) .
- Remove the hood latch cover. See COVER - HOOD LATCH (REMOVE AND REPLACE) .
- Remove the underhood storage unit. See UNDERHOOD STORAGE UNIT (REMOVE AND REPLACE) .
- Remove the LH front wheel and the RH front wheel. See WHEEL (REMOVE AND INSTALL) .
- Remove the front fascia. See FASCIA - FRONT (REMOVE AND INSTALL) .
- Remove the LH headlight assembly. See HEADLIGHT - LH (REMOVE AND REPLACE) .
- Remove the screws that attach the headlight ECU to the LH headlight assembly.
- Release the electrical connector that connects the headlight ECU to the LH headlight assembly, and then remove the headlight ECU from the LH headlight assembly. Remove the seal from the headlight assembly, if necessary.NOTE: Release the locking tab, and then pry the electrical connector with a flat head screwdriver.