60/40 Seat Switch - 2nd Row - LH - Remove And Replace: Remove
- Open all the doors and lower the LH front window.
- Carefully pry the LH outer 2nd row escutcheon away from the LH 2nd row seat back to release the clips (x2), and then release the trim from the seat.
- Fold the LH 2nd row seat back to the down position.
- Unzip the LH seat back upholstery on both sides of the seat back.NOTE: The ends of the zippers are tucked underneath upholstery.NOTE: Use a pick to aid in moving the zipper.
- Release the J-hook that attaches the lower portion of the LH 2nd row seat back upholstery to the seat back, and then release the upholstery from the seat back.
- Release the clips (x13) that attach the LH 2nd row plastic seat back to the seat assembly, and then remove the plastic seat back from the assembly.
- Release the tabs (x2) that attach the LH 60/40 seat switch to the belt escutcheon bracket.NOTE: Depress the tabs on the seat switch to release it from the escutcheon.
- Disconnect the LH 2nd row 60/40 seat switch electrical connector, and then remove the switch from the seat assembly.