Cover - Hood Latch - Remove and Replace: Install

Installation procedure is the reverse of removal, except for the following:

1. Prior to installation of the hood latch cover, use a torch light to inspect the inside of the hood latch housing for any foreign object that may have dropped in. If any object is found, remove it and confirm that the hood latch is operating as intended.
2. Inspect the clips (x4) of the hood latch cover that attach the cover to the vehicle body for any damage. If damage is found or when any clip is dislodged or missing, replace the hood latch cover with a new one since the hood latch panel clips are non serviceable parts.