Switch - Steering Wheel - LH - Remove and Replace: Remove
- Remove the driver airbag. See AIRBAG - DRIVER (REMOVE AND REPLACE)
.
- Disconnect the steering wheel electrical wiring harness from the connector.
 Courtesy of TESLA, INC.
|
- Disconnect the electrical harness from the LH steering wheel switch connector.
 Courtesy of TESLA, INC.
|
- Disconnect the electrical harness from the RH steering wheel switch connector.
 Courtesy of TESLA, INC.
|
- Release the clips that attach the horn assembly, and then move the horn assembly to the side.
 Courtesy of TESLA, INC.
|
- Disconnect the electrical harness from the lower connector, and then remove the electrical harness from the steering wheel.
 Courtesy of TESLA, INC.
|
- Remove the screws (x4) that attach the bright surround to the steering wheel, and then remove the surround.
 Courtesy of TESLA, INC.
|
- Remove the screws (x3) that attach the LH steering wheel switch to the bright surround, and then remove the switch from the surround.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|