Side Shield Sub-Assembly - 2nd Row Seat (7-Seat) - Remove And Replace: Remove
- Open the RH doors and fully lower the RH windows.
- Move the passenger seat fully forward.
- Move the RH 2nd row seat to easy entry mode.
- Remove the RH 2nd row seat toe kick cover. See COVER - TOE KICK - 2ND ROW SEAT - RH (7-SEAT) (REMOVE AND REPLACE) .
- Remove the clip that attaches the RH 2nd row seat side shield to the cushion pan.
- Release the clip that attaches the RH 2nd row seat side shield to the RH 2nd row seat assembly, and then lift the shield up to release it from the assembly.NOTE: Do not pull the shield away from the assembly as there is still an electrical connector connected.
- Disconnect the RH 2nd row seat side shield electrical connector, and then remove the shield from the assembly.