LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model Y Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Mirrors >> Exterior Fittings -- Model Y >> Wheel Arch Liners >> Wheel Arch Liner - Rear - LH (Structural Pack) - Remove And Replace >> Install

Wheel Arch Liner - Rear - LH (Structural Pack) - Remove And Replace: Install

  1. Position the LH rear wheel arch liner into the vehicle and onto the studs (x10), tuck the liner behind the garnish, and then secure the mid flap over the liner.
    G14821245Courtesy of TESLA, INC.
    G14821246Courtesy of TESLA, INC.
    G14821247Courtesy of TESLA, INC.
    G14821248Courtesy of TESLA, INC.
    G14821249Courtesy of TESLA, INC.
    G14821250Courtesy of TESLA, INC.
  2. Install the push clips (x7), fan clips (x6) and metal clips (x4) that attach the LH rear wheel arch liner to the vehicle.
    NOTE: Use a socket to press the metal clips evenly.
    G14821251Courtesy of TESLA, INC.
    G14821252Courtesy of TESLA, INC.
    G14821253Courtesy of TESLA, INC.
  3. Install the LH rear wheel. See Wheel (Remove and Install) .
scientia non olet · About LEMON Manuals