Bracket - Center - Cowl Screen - Remove And Replace: Install

Position the cowl screen center bracket into the vehicle, and then install the bolt that attaches the bracket to the vehicle.
4 N.m (2.9 lbs-ft)
NOTE:
Use of the following tool(s) is recommended:
- 10 mm socket
- Flex head ratchet/flex head torque wrench
Courtesy of TESLA, INC.
Install the cowl screen panel. See PANEL - COWL SCREEN (REMOVE AND REPLACE) .
Raise the LH front window.
Verify operation of the windshield washer and wipers.
NOTE: Spray windshield washer fluid onto the windshield. Perform two additional wipes, and then a third wipe a few seconds later.
Close the LH front door.