Trim - B-Pillar - Mid - LH (Structural Pack) - Remove And Replace: Remove
- Remove the LH lower B-pillar trim. See TRIM - B-PILLAR - LOWER - LH (STRUCTURAL PACK) (REMOVE AND REPLACE) .
- Release the clips (x4) that attach the LH upper B-pillar trim to the B-pillar, and then move the trim aside.NOTE: Pull the bottom of the trim away from the B-pillar first, and then pull the top to release the remaining clips.
- Remove the screw and release the clips (x4) that attach the LH mid B-pillar trim to the vehicle, and then remove the trim from the vehicle.
2 N.m (1.5 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- T20 socket