Ramp - Airbag - B-Pillar - LH - Remove And Replace: Remove

Open the LH front and rear doors, the hood and the liftgate.
Remove the LH upper A-pillar trim. See TRIM - A-PILLAR - UPPER - LH (REMOVE AND REPLACE) .
Remove the LH sun visor. See SUN VISOR - LH (REMOVE AND REPLACE) .
Remove the LH upper B-pillar trim. See TRIM - B-PILLAR - UPPER - LH (REMOVE AND REPLACE) .
Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace) .
Partially release the LH rear door seal, and then release the clips (x5) that attach the LH rear sill trim panel to the vehicle, starting from the front of the rear sill trim panel.
Open the LH coat hook screw cover, and then remove the screw (torque 1 N.m).
Remove the LH trunk side trim. See TRIM - SIDE - TRUNK - LH (REMOVE AND REPLACE) .
Remove the LH upper C-pillar trim. See TRIM - C-PILLAR - UPPER - LH (REMOVE AND REPLACE) .
Disconnect 12V power. See 12V/LV Power (Disconnect and Connect) .
Partially release the LH side of the headliner from the body, and then remove the screw (torque 2 N.m) that attaches the airbag ramp tether strap to the tether bracket.

Courtesy of TESLA, INC.
Partially release the LH curtain airbag from the body:
1. Remove the bolt (torque 9 N.m) near the RH side of the ramp.
2. Release the fir tree clips (x3) that attach the curtain airbag to the ramp and body.
  CAUTION: When clips are damaged during removal, the curtain airbag must be replaced.
Courtesy of TESLA, INC.
Remove the bolts (x2) that attach the LH B-pillar airbag ramp to the body (torque 3 N.m).

Courtesy of TESLA, INC.