Coat Hook - Rear - LH - Remove And Replace: Remove
- Lower the rear headliner. See HEADLINER - REAR (REMOVE AND INSTALL) .
- Release the tabs that attach the coat hook to the headliner, and then gently pry the coat hook from the headliner.
- Release the electrical harness from the rear portion of the headliner, and then disconnect the electrical harness from the LH rear map light connector.
- Remove the screw that attaches the LH coat hook tether to the roof clip.
Tip: Use of the following tool(s) is recommended:
- Torx T20 bit
- Wiha TorqueVario-S 0.8 N.m - 2.0 N.m screwdriver (installation only)
- Wiha 1/4 in bit holder adapter
- Remove the screws that attach the LH coat hook assembly to the rear headliner, and then remove the assembly from the vehicle.
1 N.m (.7 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
- Flex head ratchet/flex head torque wrench
- Remove the LH coat hook roof clip from the body.