- Position the rear trunk power socket 12V on the vehicle, insert the connector first, followed by the mount, and then the power socket 12 V outlet. Gently push the outlet with the cover facing upwards to secure in place.
NOTE:
Ensure proper fitment of the power socket 12 V.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Install the rear trunk power socket 12 V connector on the LH trunk side trim.
NOTE:
Push the connector downwards until fully lowered on the mounting tab.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Connect the rear trunk power socket 12 V connector.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Install the clips (x4) that attach the top edge of the LH trunk side trim to the vehicle.
NOTE:
Replace clips as necessary. Attach the clip closest to rear seat back first, and then work towards the liftgate.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Connect 12V/LV power. See 12 V/LV POWER (DISCONNECT AND CONNECT)
.
- Close the liftgate.
- Close the LH front door.