Trim - Light - Side Repeater - Front - LH - Remove And Replace: Remove

Apply protective tape to the LH fender around the LH front side repeater light.

Courtesy of TESLA, INC.
Carefully insert a trim tool under the rear edge of the LH front side repeater trim, and then separate it from the LH front repeater light assembly.
CAUTION: Use caution and avoid contact with the body panel.

NOTE: Discard the cover after removal.

Courtesy of TESLA, INC.
Use IPA wipes to clean the surface area on the LH front side repeater light.
NOTE: Allow at least one minute of dry time.

Courtesy of TESLA, INC.