LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Mirrors >> Interior Trim (Model X) (1 Of 2) >> Center Console - 1st Row >> Lid - Cup Holder - 2nd Row - Remove And Replace >> Install

Lid - Cup Holder - 2nd Row - Remove And Replace: Install

  1. Align the 2nd row cup holder lid datums (x8) in the cup holder retaining cutouts, and then slide the lid downwards until the tabs (x2) audibly lock and attach the lid to the cup holder.
    G15396329Courtesy of TESLA, INC.
    G15396330Courtesy of TESLA, INC.
    G15396331Courtesy of TESLA, INC.
    G15396332Courtesy of TESLA, INC.
  2. Retract the 2nd row cup holder.
    NOTE: Inspect the fit and flushness of the cupholder lid.
    G15396333Courtesy of TESLA, INC.
    G15396334Courtesy of TESLA, INC.
  3. Close the LH falcon wing door.
  4. Raise the LH front window.
  5. Close the LH front door.
scientia non olet · About LEMON Manuals