LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Mirrors >> Exterior Fittings -- Model X >> Badges And Films >> Tesla Badge - Front - Remove And Replace >> Remove

Tesla Badge - Front - Remove And Replace: Remove

  1. Open the LH front door.
  2. Lower the LH front window.
  3. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  4. Remove the LH and RH underhood aprons. See UNDERHOOD APRON - LH (REMOVE AND REPLACE) .
  5. Remove the front underhood apron. See UNDERHOOD APRON - FRONT (REMOVE AND REPLACE) .
  6. Remove the bolts (x2) that attach the front Tesla badge to the vehicle, and then remove the badge from the vehicle.

    Tip: Use of the following tool(s) is recommended:

    • Flex head ratchet/flex head torque wrench
    • Torx T25 socket
    G15393454Courtesy of TESLA, INC.
    G15393455Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals