LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Infotainment System -- Model X >> Displays >> Mechanism - Pivot - Touchscreen - Remove and Replace >> Install

Mechanism - Pivot - Touchscreen - Remove and Replace: Install

  1. Position the touchscreen pivot mechanism on the display housing.
    NOTE: Tilt and lower the mechanism onto the display housing. Ensure the plastic washers are present.
    G00660394Courtesy of TESLA INC.
    G00660395Courtesy of TESLA INC.
    G00660396Courtesy of TESLA INC.
  2. Install the new bolts (x2) that attach the touchscreen pivot mechanism to the display housing.

    10 Nm (7.4 lbs-ft) 

    Tip: Use of the following tool(s) is recommended:

    • 2 in extension
    • 10 mm socket
    • Flex head ratchet/flex head torque wrench
    • Ratchet/torque wrench
      G00660392Courtesy of TESLA INC.
  3. Install the touchscreen.
scientia non olet · About LEMON Manuals