Wiper Arm - RH - Remove And Replace: Install

Position the RH wiper arm into the vehicle, and then install the nuts (x2) that attach the wiper arm to the vehicle.
32 N.m (23.6 ft-lbs)

NOTE: Line up the wiper to the reference mark on the windshield.

Tip: Use of the following tool(s) is recommended:
- 15 mm socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the RH wiper arm nut covers (x2).

Courtesy of TESLA, INC.
Secure the RH wiper arm hose nozzle.
NOTE: Make sure the hose is routed below the arm pivot.

Courtesy of TESLA, INC.
Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace) .
Raise the LH front window and close the LH front door.