Light - Fog/Reverse - Rear - LH - Remove And Replace: Install

Position the LH rear fog/reverse light into the liftgate, connect the electrical connector. and then install the bolts (x3) that attach the light to the liftgate.
3.5 N.m (2.6 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- 8 mm socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the LH liftgate tail light side cover. See COVER - SIDE - TAIL LIGHT - LIFTGATE - LH (REMOVE AND REPLACE) .
Position the liftgate cinching actuator assembly into the liftgate, and then install the bolts (x3) that attach the actuator assembly to the liftgate.
3 N.m (2.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- 10 mm socket
Courtesy of TESLA, INC.
Connect the liftgate cinching actuator electrical connector.

Courtesy of TESLA, INC.
Install the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace) .
Install the liftgate applique. See Applique - Liftgate (Remove and Replace) .