LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Doors, Windows And Latches -- Model X >> Seals Body Enclosures >> Seal - Upper Bright - Front - LH - Remove And Replace >> Remove

Seal - Upper Bright - Front - LH - Remove And Replace: Remove

  1. Open the LH front door.
  2. Lower the LH front window.
  3. Release the LH front upper bright seal from the upper bright molding.
    G15392722Courtesy of TESLA, INC.
  4. Release the clips (x2) that attach the LH front upper bright seal to the upper bright molding, and then remove the seal from the vehicle.
    NOTE: The clips are located by the upper fender area towards the side mirror.

    Tip: Use of the following tool(s) is recommended:

    • Plastic trim tool
    G15392723Courtesy of TESLA, INC.
    G15392724Courtesy of TESLA, INC.
    G15392725Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals