Fairing - Rocker Panel - Rear - LH - Remove And Replace: Remove

Remove the bolts (x2) and clips (x3) that attach the LH rear rocker panel fairing to the vehicle, and then remove the fairing from the vehicle.
NOTE: Peel back the fender liner to access the 10 mm bolt.

Tip: Use of the following tool(s) is recommended:
- 8 mm socket
- 10 mm socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.