LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body -- Model X >> Bumper/Fascia >> V Bar - Fascia - Front - Remove And Replace >> Install

V Bar - Fascia - Front - Remove And Replace: Install

  1. Secure the clips (x4) that attach the front fascia V bar onto T badge support.
    G15389309Courtesy of TESLA, INC.
  2. Install the front fascia T badge support. See T BADGE SUPPORT - FASCIA - FRONT (REMOVE AND REPLACE) .
  3. Install the front fascia assembly. See FASCIA ASSEMBLY - FRONT (REMOVE AND INSTALL) .
  4. Install the underhood storage unit. See Underhood Storage Unit (Remove and Install) .
  5. Install the front underhood apron. See Underhood Apron - Front (Remove and Replace) .
  6. Install the LH and RH underhood aprons. See Underhood Apron - LH (Remove and Replace) .
  7. Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace) .
  8. Calibrate the LH and RH rear doors.
    NOTE: Hold the upper B-pillar button in the down position to manually calibrate the rear doors.
  9. Use the touchscreen to remove the air suspension from "Jack Mode."
  10. Use the touchscreen to set the air suspension ride height to "Standard."
scientia non olet · About LEMON Manuals