LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seats (2 Of 2) -- Model X >> Front Seat Covers, Pads, And Trims >> Side Shield - Inboard - Driver Seat - Remove And Replace >> Install

Side Shield - Inboard - Driver Seat - Remove And Replace: Install

  1. Position the driver seat inboard side shield onto the seat assembly, and then fasten the clips (x7) that attach the side shield to the assembly.
    G15404999Courtesy of TESLA, INC.
    G15405000Courtesy of TESLA, INC.
  2. Close the RH falcon wing door.
  3. Move the drive seat to the original position.
  4. Raise the LH front window and close the LH front door.
scientia non olet · About LEMON Manuals