Seat Back Carpet - 3rd Row - LH - Remove And Replace: Remove
- Open the LH falcon wing door.
- Open the liftgate.
- Fold the 2nd row 60 seat downwards.
- Remove the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace) .
- Fold the LH 3rd row seat downwards.
- Drill out the rivets (x2) that attach the LH 3rd row seat back carpet to the seat.NOTE: Use a 3/16" or 3 mm drill bit to remove the rivets.NOTE: Use a vacuum to collect debris while drilling out the rivets.
Tip: Use of the following tool(s) is recommended:
- Drill 1/2 in chuck electric
- Drill bit set
- Vacuum
- Release the clips (x9) that attach the LH 3rd row seat back carpet to the seat, and then remove the carpet from the vehicle.
Tip: Use of the following tool(s) is recommended:
- Plastic trim tool