Trim Strip - Rear - 2nd Row Seat - LH (6 seat) - Remove And Replace: Install

Position the LH 2nd row seat rear trim strip onto the seat assembly, and then secure the tabs (x5) that attach the trim strip to the assembly.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Position the LH 2nd row seat top inner covers onto the seat assembly, and then secure the tabs (x8) that attach the covers to the assembly.
NOTE: Be careful not to damage the tabs when releasing the trim. The tabs are brittle.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Slide the LH 2nd row seat magic carpet against the surround trim.

Courtesy of TESLA, INC.
Install the screws (x2) that attach the LH 2nd row seat magic carpet to the seat assembly.
2.5 N.m (1.8 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
Courtesy of TESLA, INC.
Install new LH 2nd row seat surround carpets to the surround trim.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the LH 2nd row seat underbelly trim. See TRIM - UNDERBELLY - 2ND ROW SEAT - LH (6 SEAT) (REMOVE AND REPLACE) .
Position the LH 2nd row seat seat back cover onto the seat assembly, connect the electrical connector, and then secure the clips (x11) that attach the seat back cover to the seat assembly.
NOTE: Align the lower datums and side tabs along the seat assembly, and then engage the clips fully.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the LH 2nd row seat assembly into the vehicle. See SEAT ASSEMBLY - 2ND ROW - LH (WITHOUT 2ND ROW BENCH SEATS) (REMOVE AND REPLACE) .
Raise the front windows and close all the doors.