Switch - 2nd Row - LH (6 Seat) - Remove And Replace: Install

Position the LH 2nd row switch into the underbelly trim, and then install the screws (x2) that attach the switch to the trim.
2 N.m (1.5 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- PH2 screwdriver
Courtesy of TESLA, INC.
Install the LH 2nd row seat adjust button onto the underbelly trim.

Courtesy of TESLA, INC.
Install the LH 2nd row seat underbelly trim. See TRIM - UNDERBELLY - 2ND ROW SEAT - LH (6 SEAT) (REMOVE AND REPLACE) .