60/40 Seat Switch - 2nd Row - LH - Remove And Replace: Install
- Position the LH 2nd row 60/40 seat switch into the LH 2nd row seat assembly, and then connect the electrical connector.
- Secure the tabs (x2) that attach the LH 60/40 seat switch to the belt escutcheon bracket.NOTE: Make sure the tabs are fully secured to the bracket.
- Position the LH 2nd row plastic seat back into the seat assembly, and then secure the clips (x13) that attach the plastic seat back to the assembly.
- Zip the LH seat back upholstery on both sides of the LH 2nd row seat back.NOTE: Use a pick to aid in moving the zipper.NOTE: Tuck the ends of zippers underneath the upholstery.CAUTION: Be careful not to pull the zipper off track.
- Secure the J-hook along the lower portion of the LH 2nd row seat back upholstery to the seat assembly.
- Move the LH 2nd row seat the original position.
- Position the LH outer 2nd row escutcheon into from the LH 2nd row seat back, and then secure the clips (x2) that attach the escutcheon to the seat back.NOTE: Press in the top and carefully seat the lower clips.
- Raise the LH front window and close the LH front door.