Light - Fog - Front - LH - Remove And Replace: Remove
- Remove the front fascia assembly from the vehicle. See Fascia Assembly - Front (Remove and Install) .
- Disconnect the LH front fog light electrical connector.
- Remove the screws (x3) that attach the LH front fog light to the front fascia assembly.
2.5 N.m (1.8 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- Torx T25 socket
- Release the tabs (x4) that attach the LH front fog light to the front fascia assembly, and then remove the fog light from the assembly.