Cushion Sub-assembly - 2nd Row Seat - LH (5 Seat) - Remove And Replace: Remove
- Remove the LH 2nd row seat assembly. See Seat Assembly - 2nd Row - LH (Without 2nd Row Bench Seats) (Remove And Replace) .
- Move the LH 2nd row seat backs to the upright position.
- Disconnect the 2nd row center seatbelt buckle electrical connector, and then release the edge clip that attaches the connector to the seat assembly.
- Remove and discard the bolt that attaches the 2nd row center seatbelt buckle to the seat assembly, and then remove the buckle from the seat assembly.
45 N.m (33.2 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- Torx T50 socket
- Remove the LH 2nd row recliner lever. See LEVER - RECLINER - 2ND ROW - LH (REMOVE AND REPLACE) .
- Remove the LH 2nd row recliner cover. See COVER - RECLINER - 2ND ROW - LH (REMOVE AND REPLACE) .
- Remove the bolt that attaches the LH 2nd row outer seatbelt to the seat assembly, and then remove the seatbelt from the seat assembly.
Tip: Use of the following tool(s) is recommended:
- Torx T50 socket
- Release the J-hooks (x11) that attach the underside of the LH 2nd row seat upholstery to the seat assembly.
- Disconnect the LH 2nd row seat seat cushion electrical connectors (x4), and then release the clips (x2) that attach the black connectors (x2) to the seat frame.
- Remove the LH 2nd row seat cushion assembly from the seat assembly.CAUTION: Use caution when feeding the J-hooks and connectors through the seat frame.