Cushion Sub-Assembly - 2nd Row Seat - RH (5 Seat) - Remove And Replace: Install

Position the RH 2nd row seat cushion sub-assembly into the seat assembly.
NOTE: Guide the harness and tension flaps underneath the backrest.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Secure the clip that attaches the seat belt reminder harness to the RH 2nd row seat assembly, and then connect the seat heater and seat belt reminder electrical connectors (x2).

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Secure the J-hooks (x6) that attach the RH 2nd row seat cushion trim to the seat bracket assembly.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Position the seatbelt buckle onto the RH 2nd row seat assembly, and then install the bolt that attaches the buckle to the assembly.
45 N.m (33.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- T50 socket
Courtesy of TESLA, INC.
Secure the clips (x2) that attach the RH 2nd row seat harness to the seat assembly, and then connect the seatbelt buckle electrical connector.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install and new bolt that attaches the seatbelt to the RH 2nd row seat assembly.
45 N.m (33.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- T50 socket
Courtesy of TESLA, INC.
Install the RH 2nd row seat outboard side shield. See SIDE SHIELD - OUTBOARD - 2ND ROW SEAT - RH (5 SEAT) (REMOVE AND REPLACE) .
Install the RH 2nd row recliner lever. See LEVER - RECLINER - 2ND ROW - LH (REMOVE AND REPLACE) .
Fold the RH 2nd row seat back to the down position.
Install the RH 2nd row seat assembly into the vehicle. See SEAT ASSEMBLY - 2ND ROW - RH (5 SEAT) (REMOVE AND REPLACE) .