Bracket - Toeboard - Center - Remove And Replace: Install

Install the nuts (x2) that attach the center toeboard bracket to the floor.
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
NOTE: The RH bracket opening is slotted to assist installation.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the bolts (x2) that attach the instrument panel carrier to the center toeboard bracket.
27 N.m (19.9 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- 13 mm socket
Courtesy of TESLA, INC.
Install the 1st row center console assembly. See Center Console Assembly - 1st Row (Remove and Install) .