Frame - Seat Cushion - 3rd Row - Remove And Replace: Remove

Remove the 3rd seat assembly. See SEAT ASSEMBLY - 3RD ROW (REMOVE AND REPLACE) .
Remove the bolt that attaches the LH 3rd row seatbelt anchor to the seat cushion frame. Repeat this step for the RH bolt.
45 N.m (33.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- 14 mm socket
Courtesy of TESLA, INC.
Remove and discard the bolts (x2) that attach the rear inner 3rd row seat frame to the vehicle.
45 N.m (33.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- Torx T45 socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Remove the 3rd buckle assembly. See Buckle - 3rd Row (Remove and Replace) .
Lay the 3rd row seat assembly down for access to the LH 3rd row front crush plastic.

Courtesy of TESLA, INC.
Remove the push clips (x4) that attach the LH and RH 3rd row seat front crush plastics to the seat frame.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Remove the push clips (x4) that attach the LH and RH 3rd row seat rear crush plastics to the seat frame.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Remove and discard the LH and RH front inner 3rd row seat frame bolts (x2).
45 N.m (33.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- Torx T45 socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Remove and discard the LH and RH outer 3rd row seat frame bolts (x4).
45 N.m (33.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- Torx T45 socket
Courtesy of TESLA, INC.
Remove the 3rd row seat cushion frame from the 3rd row seats.

Courtesy of TESLA, INC.