Tesla Badge - Front - Remove And Replace: Install
- Position the front Tesla badge on the vehicle, and then install the bolts (x2) that attach the badge to the vehicle.
1.8 N.m (1.3 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- Flex head ratchet/flex head torque wrench
- Torx T25 socket
- Install the front underhood apron. See UNDERHOOD APRON - FRONT (REMOVE AND REPLACE) .
- Install the LH and RH underhood aprons. See UNDERHOOD APRON - LH (REMOVE AND REPLACE) .
- Install the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
- Close the hood.
- Raise the LH front window.
- Close the LH front door.