LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Long Range Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Doors, Windows And Latches -- Model X >> Seals Body Enclosures >> Seal - Upper Bright - Front - LH - Remove And Replace >> Install

Seal - Upper Bright - Front - LH - Remove And Replace: Install

  1. Position the LH front upper bright seal on the vehicle, and then install the clips (x2) that attach the seal to the upper bright molding.
    G15392726Courtesy of TESLA, INC.
    G15392727Courtesy of TESLA, INC.
  2. Install the LH front upper bright seal on the upper bright molding.
    NOTE: Ensure the seal is properly seated onto the interior trim.
    G15392728Courtesy of TESLA, INC.
  3. Raise the LH front window.
  4. Close the LH front door.
scientia non olet · About LEMON Manuals