Fascia Assembly - Rear - Lower Remove and Replace: Install
- Install the LH and RH rear reflex lamps. See: LAMP - REFLEX - REAR - LH - REMOVE AND REPLACE .
- Position the lower rear fascia to the rear diffuser, and then secure the tabs (x8).
- Install the bolts (x6) that attach the lower rear fascia to the rear diffuser.
5 N.m (3.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- Remove the trailer hitch cover. See: Cover - Trailer Hitch - Remove And Replace .
- Position the upper rear fascia assembly onto the lower rear fascia assembly, and then secure the tabs (x21) that attach the upper assembly to the lower assembly.
- Install the screws (x4) that attach the upper rear fascia assembly to the lower rear fascia assembly.
5 N.m (3.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- Install the clip that attaches the park assist harness to the rear lower fascia.
- Install the rear fascia onto the vehicle. See: Fascia Assembly - Rear - Remove And Install .