Bracket - Toeboard - Center - Remove And Replace: Remove
- Remove the 1st row center console assembly. See Center Console Assembly - 1st Row (Remove and Install) .
- Remove the bolts (x2) that attach the instrument panel carrier to the center toeboard bracket.
27 N.m (19.9 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- 13 mm socket
- Remove the nuts (x2) that attach the center toeboard bracket to the floor, and then remove the bracket from the vehicle.
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
NOTE: The RH bracket opening is slotted to assist removal.