LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model X Long Range Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Doors, Windows And Latches -- Model X >> Latches, Strikers, And Pinch Sensors >> Striker - Hood - Remove And Replace >> Install

Striker - Hood - Remove And Replace: Install

  1. Position the hood striker onto the hood, and then install the bolts (x2) that attach the striker to the hood.

    18 N.m (13.3 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • T40 socket
    G15391890Courtesy of TESLA, INC.
  2. Remove the masking tape.
  3. Raise the front windows and close the LH front door.
scientia non olet · About LEMON Manuals