Deflector - Valance - Front Fascia - LH - Remove And Replace: Remove

Raise and support vehicle. See Raise Vehicle - 2 Post Lift .
Remove the bolts that attach the front fascia valance to the vehicle.
Torque 6 N.m

NOTE: Do not remove the middle bolts (x3).

Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- Flex head ratchet/flex head torque wrench
- 4 in extension
Courtesy of TESLA, INC.
Remove the clips that attach the front fascia valance to the vehicle, and then release the valance from the front aero shield.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Remove clips that attach the LH wheel arch liner to the valance and front fascia.

Courtesy of TESLA, INC.
Remove the nuts (x2) that attach the LH front fascia valance deflector to the valance and front fascia.
Torque 3 N.m
- 10 mm deep socket
- Flex head ratchet/flex head torque wrench
Courtesy of TESLA, INC.
Release the tabs and studs that attach the LH front fascia valance deflector to the valance and front fascia, and then remove the deflector from the vehicle.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.