Reflex Marker - Taillight - RH (Global) - Remove And Replace: Remove
- Remove the parcel shelf. See Parcel Shelf - Rear Trunk - Remove And Replace .
- Remove the trunk load floor. See Trunk Load Floor - Rear - Remove And Replace .
- Remove the trunk sill panel. See Trim - Sill - Trunk - Remove And Replace .
- Remove the RH trunk load floor bracket. See Bracket - Trunk Load Floor - RH - Remove And Replace .
- Remove the trunk floor front trim. See Trim - Front - Floor - Trunk - Remove And Replace .
- Remove the rear wall trim. See Trim - Rear Trunk - Rear Wall - Remove And Replace .
- Remove the RH trunk side trim. See Trim - Side - Trunk - RH - Remove And Replace .
- Remove the RH taillight. See Taillight - RH (Global) - Remove And Replace .
- Remove the nut that attaches the reflex marker to the body.
Tip: Use of the following tool(s) is recommended:
- Flex head ratchet/flex head torque wrench
- 8 mm 12-point deep socket
- Release the datums (x2) that attach the reflex marker assembly to the vehicle.NOTE: Carefully release the front datum next to locator pin first, then release the rear datum to prevent the surface of body from damage.