LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model S >> 2nd Row Seat Assemblies and Hardware >> Collar - Static - Pivot - 2nd Row - LH - Remove And Replace >> Remove

Collar - Static - Pivot - 2nd Row - LH - Remove And Replace: Remove

  1. Remove the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove And Replace) .
  2. Remove the LH 2nd row seat back pivot bushing. See PIVOT BUSHING - SEAT BACK - 2ND ROW - LH (REMOVE AND REPLACE) .
  3. Use a combination wrench to hold the pivot pin in place, and then use a screwdriver to pry the LH 2nd row pivot static collar off the assembly.
    NOTE: The tabs (x6) may break during removal so the static collar cannot be reused.
    G15082339Courtesy of TESLA, INC.
    G15082340Courtesy of TESLA, INC.
    G15082341Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals