LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System (3 Of 3) -- Model S >> Exterior Lights >> Light - License Plate - Remove And Replace >> Install

Light - License Plate - Remove And Replace: Install

  1. Install the rear license plate light to the vehicle.
    NOTE: Make sure foam is positioned on the light prior to liftgate installation.
    G15092446Courtesy of TESLA, INC.
    G15092447Courtesy of TESLA, INC.
  2. Connect the electrical connector to the rear license plate light.
    G15092448Courtesy of TESLA, INC.
  3. Install the LH and RH reverse light. See Light - Fog/Reverse - Rear - LH (Remove And Replace) .
  4. Install the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace) .
  5. Install the liftgate applique. See Applique - Liftgate (Remove and Replace) .
scientia non olet · About LEMON Manuals