LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim (Model S) >> Pillar And Sill Trim >> Trim - B-Pillar - Lower - LH - Remove And Replace >> Remove

Trim - B-Pillar - Lower - LH - Remove And Replace: Remove

  1. Open all the doors and lower all the windows.
  2. Remove the rear trunk parcel shelf. See Parcel Shelf - Rear Trunk (Remove And Replace) .
  3. Remove the LH and RH side bolster trims. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace) .
  4. Remove 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace) .
  5. Fold the LH 2nd row seat to the down position.
    CAUTION: If seat cushion is not present, protect the seat as required.
  6. Remove the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove And Replace) .
  7. Remove the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove And Replace) .
  8. Remove the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove And Replace) .
  9. Release the clips (x6) that attach the LH lower B-pillar trim to the B-pillar, and then remove the trim the vehicle.
    NOTE: Start by releasing the upper portion of the trim and work downward.
    G15084458Courtesy of TESLA, INC.
    G15084459Courtesy of TESLA, INC.
    G15084460Courtesy of TESLA, INC.