LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Doors, Windows And Latches -- Model S >> Closure Assist Mechanisms and Hinges >> Body Damper - Liftgate - LH - Remove And Replace >> Install

Body Damper - Liftgate - LH - Remove And Replace: Install

  1. Position the LH liftgate body damper onto the body, and then install the screws (x2) that attach the damper to the body.

    Torque 12 N.m 

    Tip: Use of the following tool(s) is recommended:

    • Torx T30 socket
    • Stubby ratchet/stubby torque wrench
    G15079325Courtesy of TESLA, INC.
  2. Close the liftgate to check for gap/flushness.
    G15079326Courtesy of TESLA, INC.
  3. Adjust the LH liftgate body damper if necessary.
scientia non olet · About LEMON Manuals