Headlight - LH - Remove And Replace: Install
- Position the LH headlight to the vehicle.CAUTION: Do not damage any components during installation.
- Install the bolts (x4) that attach the LH headlight to the vehicle.NOTE: 4x bolts, 10 mm, 5.9 N.m
- Connect the electrical connector to the LH headlight.
- Install the front fascia assembly. See Fascia Assembly - Front (Remove and Install) .
- Perform a firmware redeployment. See Firmware Reinstall - Toolbox .
- Perform a headlight adjustment using the tool or wall method. See Headlights - Adjust - NA (Tool Method) or Headlights - Adjust (Wall Method) .