Trim - Bolster - Inner - Seat - 2nd Row - LH - Remove and Replace: Install

Install the RH 2nd row bolster foam onto the RH 2nd row seat bolster substrate.
NOTE:
Ensure the foam is aligned properly with substrate. Installing the foam and substrate as an assembly will give the trim more clearance and reduce strain on the stitching.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the RH 2nd row bolster substrate and foam onto the RH 2nd row seat inner bolster trim.
NOTE: Installing the foam and substrate as an assembly will give the trim more clearance and reduce strain on the stitching.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Pull the RH 2nd row seat inner bolster trim up and onto the edge of the bolster substrate.
NOTE: Press the substrate down to give the trim more clearance and reduce strain on the stitching.

Courtesy of TESLA, INC.
Secure the RH 2nd row seat inner bolster trim onto the edge of the bolster substrate.

Courtesy of TESLA, INC.
Secure the clip that attaches the RH 2nd row seat inner bolster trim to the bolster substrate.

Courtesy of TESLA, INC.
Secure the bottom portion of the RH 2nd row seat inner bolster trim onto the bolster substrate.

Courtesy of TESLA, INC.
Install the RH 2nd row seat bolster assembly onto the seat assembly.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the bolt that attaches the bolster assembly to the seat back frame.
8 N.m (5.9 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- 10 mm deep socket
Courtesy of TESLA, INC.
Install the RH 2nd row seat back panel. See Back Panel - 2nd Row Seat - RH (Remove And Replace) .
Close the RH rear door.
Restore the front passenger seat back to its original position.
Raise the RH front window and close the RH front door.