LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Fittings -- Model S >> Underhood Trim >> Underhood Apron - Front - Remove And Replace >> Install

Underhood Apron - Front - Remove And Replace: Install

  1. Install the front underhood apron to the body, and then fasten the clips (x7) that attach the apron to the body.
    G15081401Courtesy of TESLA, INC.
    G15081402Courtesy of TESLA, INC.
  2. Install the LH and RH underhood aprons. See Underhood Apron - LH (Remove And Replace) .
  3. Install the rear underhood apron. See Underhood Apron - Rear (Remove And Replace) .
scientia non olet · About LEMON Manuals