LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Fittings -- Model S >> Underhood Trim >> Cover - Shock Tower - LH - Remove And Replace >> Install

Cover - Shock Tower - LH - Remove And Replace: Install

  1. Position the LH shock tower cover to the vehicle, and then install the clips (x4) that attach the cover to the vehicle.
    G15081387Courtesy of TESLA, INC.
  2. Position the washer hose to the LH shock tower cover, and then install the clips (x3) that attach the washer hose to the cover.
    G15081388Courtesy of TESLA, INC.
  3. Install the LH underhood apron. See Underhood Apron - LH (Remove And Replace) .
  4. Install the rear underhood apron. See Underhood Apron - Rear (Remove And Replace) .
scientia non olet · About LEMON Manuals