- Position the liftgate seal onto the vehicle.
NOTE:
Align the front seam located on the liftgate seal onto the top center of the liftgate.
 Courtesy of TESLA, INC.
|
- Use a dead blow hammer to carefully install the liftgate seal onto the body.
NOTE:
Use IPA wipes to clean and remove remaining residue on the liftgate seal with IPA wipes.
 Courtesy of TESLA, INC.
|
- Pull the seal strings to seat the seal.
NOTE:
Make sure the liftgate seal is properly seated along the interior trim.
 Courtesy of TESLA, INC.
|
- Close the liftgate.