Latch - Seat Back - 2nd Row Seat - LH - Remove And Replace: Install

Position the LH 2nd row seat, seat back latch onto the seat assembly, and then install the bolts (x2) that attach the latch to the seat.
20 N.m (14.7 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- 13 mm socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Connect the LH 2nd row seat, seat back latch electrical connector, and then engage the connector lock.

Courtesy of TESLA, INC.
Position the LH 2nd row shoulder plastic trim to the seat assembly, and then fasten the clips (x5) that attach the trim to the seat assembly.
NOTE: Remove the plastic trim tool or shop towel. Ensure the fold switch harness and connector are properly placed.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the clips (x3) that attach the LH 2nd row seat shoulder plastic trim to the seat assembly.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the clips (x4) that attach the LH 2nd row backrest cushion to the seat assembly.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Fold LH 2nd row seat to the down position.
Install the LH 2nd row backrest LH and RH headrest guides.
NOTE: Slide the guides into the backrest frame. Ensure the headrest guide locking tabs are fully engaged. Guide with adjustment button installed inboard.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the LH 2nd row headrest. See Headrest - 2nd Row - LH (Remove And Replace) .
Install the LH 2nd row seat back side cover. See COVER - SIDE - SEAT BACK - 2ND ROW - LH (REMOVE AND REPLACE) .
Install the LH 2nd row seat back panel. See Back Panel - 2nd Row Seat - LH (Remove And Replace)
Move driver seat to original position.
Raise the LH windows and close the LH doors.